You will receive 3M picture hanging strips with your order. Before you apply your 3M strips, be sure to measure the wall where you would like to hang your planner to make sure that it will fit. To hang your planner:
STEP ONE: Clean the area of your wall when you will hang your planner with isopropyl rubbing alcohol and use a soft cloth to wipe gently. Leave to air dry. Please do not use general household cleaners as these may contain ingredients which will prevent the 3M strips for adhering correctly.
STEP TWO: Separate the strips, align two of them together and then press together. When the two strips are pressed together correctly, you will be able to hear them click. You should end up with four (4) sets of strips once they are all connected.
STEP THREE: Remove the backing tape from one side of the 3M strips and adhere to the two top corners of your planner. The third and fourth strips should be placed about 2/3s of the way down the planner from the top.
STEP FOUR: Remove the second backing tape from the 3M strips and then line up your acrylic planner evenly. You may find it helpful to use a pencil to mark where the corners of the planner should go.
STEP FIVE: Stick the acrylic planner to the wall and press firmly for 30 seconds. Make sure you firmly press where each of the 3M strips are located.
STEP SIX: For best results, lift the bottom of your acrylic planner up at a 45 degree angle and gently remove the planner from the wall. As you do this, make sure that one of the 3M strips which adheres to the wall stays attached to the wall. Press the 3M strips that remain on the wall firmly. This helps the long term adhesion of the strips.
STEP SEVEN: After one hour, mount your acrylic wall planner back on the wall by lining up both sets of 3M strips.
